How to install the V battery port cover on a R48 e-bike

How to install the V battery port cover on a R48 e-bike

The V battery port cover has been designed specifically for e-bike frames with an integrated battery. The same cover works just as well with the Velec from the Citi range as the R48 models.

Here is the step-by-step battery port cover installation guide for the R48, R48 Pro, and R48-i. The method is the same for small, medium, and large frames.

- Remove the battery

- Place the battery port cover on the frame.

The logo must be on the opposite side of the derailleur.

- Pass the strap around the steering column and close the belt buckle. Pull on the strap tab to tighten it slightly.

- Pass the Velcro strips through the back of the cover.

- Insert the velcro strips into the plastic rings.

- Pull the velcro strips before turning them back on themselves.

- This step ensures that the cover is securely attached to the frame.

- If necessary, tighten the strap around the steering column.

- The battery port cover, installed on an R48, does not go all the way around the frame. The black space on the underside of the frame will not be covered by the accessory. This is normal and will not reduce the effectiveness of the battery port cover.